1. Consider the tension range of the test material

The tension of the equipment is different, the use of sensors are not the same, but also determines the structure of the tension machine. Generally, manufacturers will control the tension within the range of 100 newtons, which determines the single-arm structure. With the single arm type of the relative structure is the portal structure, it is relatively large, generally in more than one meal, so the manufacturers will not choose basic.

2. Test stroke problem

Test according to material requirements, travel within the standard range. Equipment in the test, we should pay attention to whether the elongation of the material is more than 1000%, if more than the choice of travel is best in 1000 or 1200mm. Stroke problem is an important step in the purchase of tensile testing machine.

3. Standard configuration problem

Tensile testing machine configuration is mainly host, microcomputer, printer. These three configurations are the most basic configuration, if the microcomputer function is better, you can print directly. The greatest advantage of the computer is to be able to analyze the data in detail, such as data editing, integration of the data, convenient for later use.