|
Product Details:
|
| Temperature Evenness: | ≤±2℃ | Exterior Chamber Material: | Stainless Steel Plate + Powder Coated |
|---|---|---|---|
| Customized Support: | OEM | Temperature Down Speed: | 0.7°C~1.2°C/min |
| Temperature Range: | -20℃-150℃ | Temperature Rise Speed: | 1.0°C~3.0°C/min |
| Power: | 220V , 50Hz | Controller Resolution: | ±0.3℃；±2.5%RH |
100L Battery Test Chamber , High And Low Temperature Test Chambers
Products Description:
High and low temperature test box is used to test the temperature and cold resistance, suitable for the quality control of electrical equipment, automobile, food, chemical, building materials, luggage, tape, printing, packaging and other industries.
Equipment Introduction:
Programmable Constant Temperature Humidity Test Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
1. The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2. Available in Chinese and English LCD touch screen, easy operation and program.
3. Able to display the relative date and information of the whole operating system in running mode, graphic display. Precautions, maintenance and troubleshooting appear on the screen instantly.
4. The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5. The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6. Water Supply adopts automatic watering System, Circulating water supply together with water filter.
|
High -low temperature chamber
|
|||||
|
|
TGDW-100UA | TGDW-150UA | TGDW-250UA | TGDW-500UA | TGDW-010UA |
| Workroom Dimensions(cm) | 50*40*50 | 50*50*60 | 60*60*70 | 80*70*90 | 100*100*100 |
| Inner chamber volume(v) | 100L | 150L | 252L | 504L | 1000L |
| Outer Diemension W*D*H(cm) | 98*95*160 | 98*105*170 | 108*112*180 | 128*125*200 | 148*155*210 |
| Packing Size | 113*110*175 | 113*120*185 | 123*127*195 | 133*140*215 | 163*160*225 |
| G.W(kg) | 340 | 370 | 430 | 460 | 600 |
| Temperature Range | A:-20℃-150℃ B:-40℃-150℃ C:-60℃-150℃ D:-80℃-150℃ | ||||
| TemperatureFluctuation | ≤ ±0.5℃ (standard) | ||||
| Temperature Evenness | ≤ ±2℃ | ||||
| Temperature Deviation |
≤ 1℃
|
||||
| Accuracy | 0.1℃ (standard) | ||||
| Temperature Rise Speed | 1.0℃~3.0℃/min | ||||
| Temperature Down Speed | 0.7℃~1.2℃/min | ||||
| Time needed for heating |
RT℃~150℃≤30min
|
||||
| Time needed for cooling | RT℃~-40℃≤30min | ||||
| The machine noise | ≤72dB(A) | ||||
| Load on the largest | 100kg,≤20 kg/layer | 150kg,≤26 kg/layer | 260kg,≤30 kg/layer | 260kg,≤40 kg/layer | 300kg,≤60 kg/layer |
| Equipment installed power | ~1.95KW | ~2.35KW | ~2.85KW | ~3.5KW | ~4.35KW |
| Material |
The studio:# SUS304 stainless steel
|
The outer wall: A3 carbon steel plate with plastic spray/ #SUS304
|
|||
| Wind Cycling Way | Centrifugal fan-broadband type forced air ciruculation | ||||
| Refrigeration Way |
Single stage compression refrigeration
|
||||
| Refrigerater |
French Tecumseh
|
||||
| Refrigerats | R404A USA Dupont environment protection refrigerant | ||||
| Condesing Way | Air-cooled or water-cooled | ||||
| Heater | Nickel Chorme Heating Wire Heater | ||||
| Control Instrument | HLS touch screen | ||||
| Design Criteria | GJB150.3 GJB150.4 GB/T2423.22 GB10589-89 GB11158-89 | ||||
| Standard Accessories parts |
Observe window(double-deck cavity toughened glass),PL inner chamber,Wet and dry bull gauze, 3 fues, 1 power line
|
||||
We keep good quality and competitive price to ensure our customers benefit ; We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from. Each batch of parts is done quality sampling inspection before into the warehouse, and Each product before delivery is tested by the national authoritative third-party inspection agency
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Contact Person: Ms. Kris Zhang
Tel: 0086-0769-85914911
