AC 380V 50HZ Drop Weight Impact Testing Machine Electromagnetic

AC 380V 50HZ Drop Weight Impact Testing Machine Electromagnetic

Operation specification:

1, wiring: the power line with random access to three-phase power supply and ground, the control box and testing machine will also use random belt; (If press the up button but run down or press the down button but run up during the trial run, just change the phase number at the power supply;)

2. Drop height adjustment:

3. Put the measured object on the workbench, and then fix it with a fixed rod;

4. Press the up button to elevate the object to the set height;

5, press the drop button to make the workbench instantly out of the measured object, the measured object to do free fall movement;

6. Press the reset button to restore the working state of the workbench;

7. If the test is repeated, repeat the above steps;

8, after the test: press the lower button to make the work table operate to the lowest position close the power button.AC 380V 50HZ Drop Weight Impact Testing Machine Electromagnetic

Uses:

Drop test machine is mainly used to assess the degree of impact of the package on the actual transportation, loading and unloading process, and to assess the impact strength of the package during the handling process and the rationality of the packaging design

Features:

1 single wing drop tester to do free drop test of the package surface, angle, edge, with digital height indicator and height tracking decoder, which can accurately give the product drop height, and the pre-set drop height error of less than 2%, or 10 mm.

2 single wing drop test machine using a single-arm and double column structure, with electric reset, electronically controlled drop and electric lift device, easy to use. Unique hydraulic buffering device greatly improve the life of the machine, the stability and safety of single-arm set can be easily placed on the product, the drop angle impact surface floor plane angle error is less than 5 degrees.

Parameter:

Customer Support Services:

Ø Installation

Ø Training (Training customer employees)

Ø Calibration

Ø Preventative maintenance

Ø Replacement parts

Ø Assistance via phone or internet

Ø On-site diagnosis and repair/online diagnosis and repair