|
Product Details:
|
| Rated Load (kg): | 800 | Table Size (mm): | 1000×1000 |
|---|---|---|---|
| Bump Peak Acceleration （g）: | 5～100 | Bump Rate (Times/Min): | 10~120 |
| Brand: | GSKA | Post-Peak Sawtooth: | 6～18 |
| Weight (kg): | 5600 | Power: | AC220V±10%，50Hz |
| High Light: | Impact Test Bench,Vibration Test Bench |
||
100kg Pneumatic Vertical Impact Impact Test Bench Half Sine Wave
Product description:
GSKA-11 series pneumatic vertical shock test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
GSKA-11 series pneumatic vertical shock test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
Pneumatic drive, simple structure and high reliability, without hydraulic leak risk.
Maximum shock rate up to 120 times / min.
Impact testing for small pulse lower to 0.3ms
Shock testing machine with high acceleration is up to 3000g
It can easily realize large shock pulse width and small overload test.
With a fast shock rate comparing to motor or hydraulic driven bump table, it has higher reliability and better bump waveform.
The speed and rate of shock can be easily controlled by adjusting the gas pressure.
IPS-2000 shock control and measurement system can perform manual shock, continuous shock (bump test), single shock, and interval shock.
Built-in brake mechanism ensures the safety of operation in any situation.
Technical Specfications:
|
Model Parameters |
GSKA
|
GSKA -15 |
GSKA -25 |
GSKA -50 |
GSKA -100 |
GSKA -200 |
GSKA -400 |
GSKA -600 |
GSKA -800 |
GSKA -1000 |
GSKA -2000 |
|
| Rated Load (kg) | 5 | 15 | 25 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 2000 | |
| Table Size (mm) | 150× 150 |
200× 200 |
300× 300 |
500× 500 |
600× 600 |
800× 600 |
800× 800 |
1000× 800 |
1000× 1000 |
1200× 1200 |
1500× 1200 |
|
| Peak Acc. (G) | Half-Sine | 5-2.5k | 5-2k | 5-1500 | 10-750 | 10-600 | 10-450 | 10-400 | 10-300 | 10～300 | 10～250 | 10～150 |
|
Post-Peak Sawtooth |
10-200 | 10-100 | 10-50 | |||||||||
| Trapezoid | 15-200 | 15-100 | 15-60 | 15-50 | ||||||||
| Pulse Duration (ms) | Half-Sine | 0.5～40 | 1～40 | 06～60 | 1.5～60 | 2～60 | 2.5～60 | 3～60 | 3.5～60 | 4～60 | 4.5～60 | 6～60 |
|
Post-Peak Sawtooth |
3～18 | 6～18 | ||||||||||
| Trapezoid | 3～18 | 6～18 | ||||||||||
| Bump Waveform | Half sine wave | |||||||||||
|
Bump Peak Acceleration (g) |
4 ~150 | 5～100 | ||||||||||
| Bump Pulse Duration (ms) | 2～30 | 3~30 | ||||||||||
| Overall Dimension (mm) | 1000× 1000× 2100 |
1200× 1000× 2200 |
1400× 2300 |
1600× ×2300 |
1700× ×2300 |
1700× ×2300 |
1900× ×2450 |
1900× ×2450 |
2000× ×2450 |
1900× ×2550 |
2200× ×2550 |
|
| Weight (kg) | 1300 | 2300 | 3000 | 4000 | 4500 | 4500 | 5000 | 5200 | 5600 | 6200 | 7300 | |
|
Bump Rate (Times/Min) |
10~120 | |||||||||||
| Power | AC220V±10%,50Hz | |||||||||||
| Air Source | ≤0.8Mpa | |||||||||||
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense | |||||||||||
| Standards |
MIL-STD-810F IEC68-2-27 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580
|
|||||||||||
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Contact Person: Ms. Kris Zhang
Tel: 0086-0769-85914911
